Anybus CompactCom C40 Chip



The Anybus® CompactCom™ C40 is a high-performance network communication solution in chip format. It consists of the Anybus NP40 network processor loaded with the software you need to connect an industrial device to different fieldbus or Industrial Ethernet network.

Features and benefits:

  • Multi-network connectivity in a chip – Select from: PROFINET, EtherNet/IP, EtherCAT, Modbus TCP, Powerlink, BACnet/IP,  PROFIBUS, CC-Link and DeviceNet
  • A ready-made solution minimizing your programming efforts
  • New and future network updates and enhancements maintained by HMS
  • Fast data transfer: up to 1500 bytes of process data in each direction
  • Possibility to send a complete Ethernet frame via the socket interface (up to 1500 bytes). Support for more than 20 socket connections
  • Very low latency <15μs (EtherCAT)
  • Clock-synchronous operation for high-speed networks
  • Event-based interface method enables easy to access input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and high speed SPI. I/O (shift register interface) is also available
  • Use the same chip for different Ethernet networks. Simply download new firmware to enable communication with another network
  • Firmware management tool enables easy download via FTP or serial connection
  • Flash-based file system with two-disc access (internal and external)
  • Support for safety networks via the black channel to the IXXAT Safe Solutions.
  • Solid security: Mandatory software signatures prevent unauthorized software illicit copying.
Model Name MCM-100
System Specification
Processor Intel Atom® x7-E3950 processor
Video 1x DisplayPort
Memory DDR3L 1066 SODIMM 2 GB
Storage Factory installed 128 GB mSATA SSD
Ethernet 2x GbE LAN (Intel® I210-IT)
Serial Port 2x COM (2 x RS-232/422/485)
USB 2x USB 2.0 + 2x USB 3.0
Mini PCIe 2x Mini PCIe card slots
Wireless Kit (option) Wi-Fi/4G LTE wireless Kit
Power Supply 6 ~ 36 VDC, Optional 40W AC/DC adapter
Vibration Measurement I/O Specification
Channels 4CH
Resolution 24-Bit
Max. Sampling Rate 128 kS/s
Input Range ±10V
Input Mode Diff/P-Diff
Input Coupling AC/DC
IEPE Excitation Current 0 or 2mA (IEPE compliance: 24V)
Over-Voltage Protection ±60V
DC accuracy – Offset Error Typical: ±0.15mV, Max. ±0.3mV
DC accuracy – Gain Error Typical: ±0.15%, Max. ±0.3%
System Noise 50 μVrms
-3dB Bandwidth 0.49 * sampling rate
AC Cutoff 0.4Hz (-3dB), 2.4Hz (-0.1dB)
Flatness ±0.01 dB (20 Hz to 1 kHz)
CMRR 60 dB (20 Hz to 1 kHz)
Crosstalk -100 dB
Dynamic Range 100 dB
SFDR 104 dB
THD -94 dB
THD+N -91 dB
Trigger Source Analog or digital, software selectable
Trigger Mode Post, delay, middle, pre-trigger, re-trigger
Auto-Calibration Yes
DIO 2 programmable function I/O
Dimensions 183 (W) x 110 (D) x 83.85 (H) mm
Construction Full Aluminum Alloy
Mounting DIN-rail/wall mountable
Operating Temperature 0 to 55°C (32 to 131˚F)
Storage Temperature -20 to 70°C (-4 to 158˚F)
Humidity approx. 95% @ 40°C (non-condensing)
Vibration Operating 5 Grms, 5-500 Hz, 3 axes w/ mSATA SSD
ESD Contact +/-4 KV, Air +/-8 KV
Shock Operating 100 G, half sine 11 ms duration w/ mSATA SSD
EMC CE & FCC Class B (EN61000-6-4/EN61000-6-2)

Additional information